The Milwaukee 3/8 in. Tradesman Drill features an 8 Amp motor and 0―2800 RPM to deliver the power and control you need when drilling in metal or wood and in fastening applications. The powerful motor and variable speed trigger enable fast drilling, while the all-metal gear case offers durability and superior support in high-torque applications. You’ll get increased maneuverability and control from the side handle. The 2-finger trigger and soft-grip handle provide added comfort during prolonged use.
- Powerful 8 Amp motor is ideal for heavy duty drilling applications
- 3/8 in. keyless, all-metal chuck for high grip strength and reduced slippage
- Delivers up to 2800 RPM with variable speed trigger and reverse
- All-metal gear case protects and supports the gears in high-torque applications
- Durable construction for longer tool life
- 8 ft., 2-wire fixed rubber cord for long reach
- 5-year limited warranty
- Milwaukee 0240-20 features a durable, all-metal gear case protects and supports the gears in high-torque applications
- Ideal for metal drilling, wood drilling and fastening applications
Russel Goldner
Verified Purchase
Great drill
Anderson Quigley
Verified Purchase
This is a well balanced drill and is comfortable to use. Solid construction, but not too heavy IMO. Lots of power. Id recommend this to anyone looking for a solid corded drill.
Nova Gutkowski
Verified Purchase
Industrial grade for daily use. Very good for commercial use.
Maggie Olson
Verified Purchase
This unit has good power and is very well made over all, but the chuck is a modern hand-tightened one (versus the old style with the chuck key). It is not good. I cannot get it to tighten down enough in many cases. It has bearing problems so that it wants to stick at several places in its range, mostly for very small or large bits – most of the middle range is just fine. The chuck and collar are rather small, so that it is difficult to get two hands on it to open or close the chuck. I have a problem with this for *every* bit I use, *every* time. It is quite annoying when you are under the Jeep drilling out rusted, snapped-off Grade 5 suspension or bumper bolts and have to change the bit on a regular basis. I bought this SPECIFICALLY to replace my 18V Makita and 18V Craftsman drills as I was draining batteries right and left with all this sustained use. Further, this drill is poorly balanced compared to even my $19 single speed, corded Black & Decker. It is fatiguing to hold for any length of time as the handle is so short and the snout so long. I needed a drill that could help me get rid of all 40 rusted out bolt stubs in this Jeep frame that I am restoring and building up, with adequate power and strength/torque for the job and with a cord so that I was not praying to the Battery Gods all the time. This one did an excellent job with that, so I will definitely recommend it. It is a solid motor and gear set in a tough housing. However, the chuck just plain stinks and the drill’s balance is poor in the hand. I like this drill a lot and will investigate chuck alternatives. I do not know whether this one can be replaced. If so, that might make me much happier, along with some lead golf club tape to wrap around the handle so the snout of this thing does not want to pull down so hard all the time. That is really a hassle if you are using a 1/2″ bit that is four inches long and doing so for hours at a time. Excellent drill, overall. Just these two problems. Oh, and no case. A case would have been a nice touch and would not have added much to the very low price. Come on, Milwaukee. Get this package up the the standards of your other gear. A cheap, blown-plastic case is the norm these days. All power tools ought to come with a case since they cost you pennies to make and you can make up some of that with a very inexpensive card stock slip sleeve for packaging rather than the more costly, very nice corrugated cardboard box I paid for and then threw away because it was damaged by the Home Depot child who uncrated it.
Brittany Schmidt
Verified Purchase
I chose this drill for the motor rating which I need. So far it provides the torque I need.
Edgar Koch
Verified Purchase
I’ve had this only for a couple months. the pressure sensitive trigger is a nice feature, and the chuck feels like good quality, nothing flimsy. i’m happy with my purchase for the dozen times or so that I’ve used it to drill through plaster walls
Khalil Schamberger
Verified Purchase
This is the best drill for the money by a country mile. Super powerful, drills with ease through wood, sheetrock, metal and brick.
Stephen Tremblay
Verified Purchase
A good solid drill with lots of power that gets the job done.
Madeline Hermann
Verified Purchase
Adequate power and good weight distribution for use by any operator.
Adeline Dickinson
Verified Purchase
Drill seems solid but it is for fairly light use. Drilling pilot holes, using a wire brush, it runs great. It doesn’t feel all that much more powerful than my cordless 18v Porter Cable though and I was really looking for something with more power. Should have gone up one level. I used it to drive some 4.5″ lag screws (not the right tool for the job, I know, but I had loaned out my impact driver – still, I didn’t think it was anything particularly out of line I was asking it to do) and it just couldn’t do it. It actually smoked a couple of times and stopped before it could finish them off. Probably plenty of drill for most applications though.
Summer Smitham
Verified Purchase
Excellent drill
Frank Tillman
Verified Purchase
Delivered to my house. Arrived quickly without damage. I bought this to replace a 35 year old Crafysman 3/8. It’s very powerful and well balanced. Some have mentioned issues with the chuck. I have not had any problems so far. It holds everything tight including regular drill bits and wood boring bits.
Elody Tillman
Verified Purchase
Great price, great quality
Toy Orn
Verified Purchase
This drill meets all of my expectations.
Brooke Barton
Verified Purchase
I bought this for my husband as a birthday present. (He picked it out, so I knew it was exactly what he wanted.). He absolutely loves it! He’s already used it for a big project, and I know he will use it for many years.
Cordell Runolfsdottir
Verified Purchase
Heavy duty.
Krystel Gleason
Verified Purchase
Very happy with the drill.
Shanel Keebler
Verified Purchase
Great drill, workhorse! We use it every day at high rpms.
Annamarie Kohler
Verified Purchase
Great company and great drill. I hope this one lasts 26 years like my last one from them did.
Genesis Willms
Verified Purchase
Arrived on time, and the drill itself lives up to Milwaukee’s reputation as being one of the best brands on the market for power tools.