Milwaukee 9 in. 14 Teeth per in. TORCH Thick Metal Cutting SAWZALL Reciprocating Saw Bladess (6 Pack)

73 reviews for Milwaukee 9 in. 14 Teeth per in. TORCH Thick Metal Cutting SAWZALL Reciprocating Saw Bladess (6 Pack)

1. Rated 5 out of 5

   Jarrell Botsford
   December 1, 2022    Verified Purchase

   Great blades for cutting metal. The length of these blades are good for wider metal and greater control. Its hard to undercut and ding/bend the blade with these. Ive cut everything from nails to cast iron railing with these blades. They will take a pounding but will of course wear out so a multi-pack like this is great.

2. Rated 4 out of 5

   Maxie Renner
   November 22, 2022    Verified Purchase

   These work good in my saw saw. Don’t last as long as I’d hoped for. Would advise the carbide blades if your cutting gnarly metal

3. Rated 5 out of 5

   Nathanael Quigley
   November 20, 2022    Verified Purchase

   These blades are tuff.

4. Rated 3 out of 5

   Jeff Aufderhar
   October 15, 2022    Verified Purchase

   They don’t seem to work any better than the cheap brands. Actually slighty worst they dull too quickly.

5. Rated 5 out of 5

   Wade Denesik
   October 5, 2022    Verified Purchase

   The blades worked

6. Rated 5 out of 5

   Gwendolyn Hammes
   October 3, 2022    Verified Purchase

   Great blades for cutting metal. The extra teeth help speed up the cut and extend the life of the blades. The length of these blades are good for wider metal and greater control. Its hard to undercut and ding/bend the blade with these. Ive cut everything from nails to cast iron railing with these blades. They will take a pounding but will of course wear out so a multi-pack like this is great.

7. Rated 4 out of 5

   Ressie Brakus
   September 22, 2022    Verified Purchase

   Used up one blade for every 2-3 cuts of 1/2″ rebar.

8. Rated 5 out of 5

   Delmer Langworth
   September 10, 2022    Verified Purchase

   Wish they came in singles though.

9. Rated 4 out of 5

   Marlen Baumbach
   September 10, 2022    Verified Purchase

   I used it to cut galvanized steel and it worked like a charm

10. Rated 5 out of 5

    Keven Kertzmann
    September 2, 2022    Verified Purchase

    This is a fantastic price for a 10-blade pack of 9 inch demo blades. Sawzalls make quick work of demolition or remodeling, where it is easy to slip the thin blade between the stud and plate to cut the nails and remove the stud. These work great for cutting metal screws, bolts and lumber, as well as metal and plastic pipes, wires, conduits, anchors, unistrut and lumber hangers. They seem to be super-hardened, so they last a long time before the teeth get worn down. The other problem that I often encounter is the blades getting bent. Since these are an inch wide, they hold their shape better, and allow bending back straight more often without snapping off. The 9-inch long blade also means cutting completely through a 2×6 wall, including the finish material, all from one side. Demo work is hard on tools, and these take a lot of abuse before wearing out.

11. Rated 4 out of 5

    Allene Pacocha
    August 24, 2022    Verified Purchase

    good deal

12. Rated 5 out of 5

    Nathaniel Ratke
    August 9, 2022    Verified Purchase

    Used it to cut through some really old fence post that was at least 3/8” thick. Not thin like the new fence post. But cut through it like butter. Made short work of a hard job.

13. Rated 5 out of 5

    Jaydon McLaughlin
    July 21, 2022    Verified Purchase

    have used in the past always my first choice. For me blades seem to work and last the longest. Getting them at a great price . DEAL BREAKER !!!!