Grizzly Industrial 24 in. 5 HP Drum Sander with VS
$2,223.95
Attain a contemporary and inexpensive tool to complete all your heavy force needed jobs at the workplace with Grizzly Industrial Drum Sander with VS.
In stock
Description
You can’t beat a Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness. These 24 in. Drum Sanders are the ideal size for finishing up after most planers and the dual drums allow a coarse and fine sanding in 1 pass, if desired. The G1066Z features a variable-speed feed rate and built-in amp meter to gauge workload. Every shop needs 1 of these.
- 5 HP, 220-Volt drum motor dri-voltes 2 aluminum sanding drums
- Handles stock up to 23-1/2 in. and 4-1/4 in. T
- Variable speed conveyor: 0 FPM to 20 FPM
- Surface speed of drum: 2300 FPM
- Hook and loop sandpaper 3 in. W
- Industrial rubber conveyor belt (similar to wide belt sander belts)
- Control panel with amp load meter
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 389 lbs |
|---|---|
| Dimensions | 40.5 × 38 × 44 in |
| Model | G1066Z |
| Variable Speed | Yes |
| Tools Product Type | Power Tool |
| Table Width (in.) | 0 |
| Table Length (in.) | 0 |
| Reconditioned | No |
| Power Tool Features | Variable Speed |
| Portability | Stationary |
| Minimum feed height (in.) | 0.125 |
| Maximum feed rate (ft./min.) | 20 |
| Maximum feed height (in.) | 4.25 |
| Maximum Speed (rpm) | 3450 |
| Dust collection type | Port |
| Cord Length (ft.) | 8 |
| Condition | New |
| Color Family | Green |
| Bench & Stationary Tool Type | Drum Sander |
| Belt width (in.) | 3 |
| Belt length (in.) | 176 |
| Amperage (amps) | 25 A |
| Voltage (volts) | 220 |



