The JET 115-Volt 1000 CFM Air Filtration System is ideal for smaller home shops. It’s also easy to install on your ceiling out of your way. Its 2-filter system with air diffuser disperses outgoing air into a broader pattern. It features a fully enclosed ball bearing motor with overload protection for long, dependable service. A remote control and timer facilitate added convenience with its use.
- 2-filter system with air diffuser disperses outgoing air into a broader pattern
- Disposable electrostatic outer filter attracts more dust particles
- Inner pocket filter is removable for easy cleaning
- Easy grip handles allow easy portability of unit
- Four eye bolts let you hang the unit from your ceiling
- Remote control has built-in timer with 2-, 4- and 8-hour settings
- Fully enclosed ball bearing motor with overload protection gives you long, dependable service
- Rubber feet prevent marring of the surface when placed on your workbench
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Works great easy to install and use highly recommended
I like that it has three speeds. I can feel the air circulating around the shop when it’s running. The air is noticeably cleaner, much better for our lungs, and keeping the upstairs house cleaner also .
Very good filtration system. It knocked the dust down in my shop by a solid 90%. I would recommend this system to anyone who wants to get dust under control.
Shipping was on schedule and the driver left it by my garage instead of front door which is great.
Great air cleaner. I bought a Dylos air monitor to make sure my dust collection/air cleaning system in my 24×24 garage was working. This thing keeps the air in the shop way below OSHA clean air standards. On high, it will clean the air back to safe levels in about 5 minutes! I usually keep it on low or medium, depending on what I’m working on, and it keeps the air clean. I would definitely recommend this for a wood workshop.
easy to install, easy to change filters, not too loud on lowest setting.
I had researched air filtration units and read consumers comments. The unit was just as I expected. It is a good high quality product and works very well. I am pleased with it.
No problem setting up right out of the box. Works great, in a 480 sqft. shop. Keeps dust down very well.
Works like a charm. It takes two people to hang it from the ceiling because the unit it quite heavy. My shop air has never been cleaner.
The unit is on the heavy side at 61 lbs. But it’s well made. Assembly not required and the remote for it works great. Bought the unit for our cabin that is under construction. We needed a way to remove the additional air particulate to keep it out of the geothermal system. Additonal air filtering works great. And the ttimer system allows us to set it and forget it when we leave. This unit will be moved into my future work shop when the cabin is complete. I would also recomend this for those serious about their air quality in the home. If you have hobbies or home business that requires a clean environment I would recommend this. It does produce some noise, but you can find ways to dampen that.
I installed the Jet air filtration unit in my garage wood shop, centrally hung from the rafters. I have a Delta dust collection system, but it wasn’t picking up the finer particles from sawing and sanding. I work with exotic woods and the dust can be extremely dangerous to one’s health (I use a respirator). I was tired of breaking out a shop vac all the time and cleaning up the dust off tools, wood storage and storage cabinets. My shop is a two car garage and I have noticed that most of the dust is now captured in the filtration unit. I also needed to cut down on dust before spraying nitrocellulose lacquer. (I use explosion proof fans and filters in the spray booth.) I now have a clean environment for my projects, and recommend the Jet unit. Plenty of suction and power to do the job for me!
We haven’t had this very long but it seems to do the job that I wanted and that is clean the air quality from the dust my husband makes every day from sanding his projects. I love that there is a timer and we can leave it on after he is done for the day and it shuts off after the 2 or 4 hours we leave it on. The next day the shop is much cleaner, the only draw back is the cost of the air filters!
The air filtration unit works well. It cleans the air in my 23×23 shop in just under an hour on low. Ceiling mounted 2 feet from wall. Low setting is quite. Medium setting is louder and use it when sanding. Squirrel cage fan was well balanced and unit is vibration free. Remote is a plus. Very happy.
Simple and easy to use. Clears a 1200 sq ft metal fab shop nicely. Pretty quiet given amount of air running through.
Good quality components, seems well-made for the most part. Only had mine for a month, took some doing for me to hang it from my shop ceiling; had to upgrade the threaded ‘pop-rivet’ fasteners to threaded eye bolts w/ fender washers when the rivet things began to turn. Had it running a few hours, not too noisy.
BEFORE YOU TURN IT ON: remove the filters and examine the cap screws that hold the blower to its mount. One of mine was not threaded in at all and two were loose. The fourth one is probably loose, but it can’t be reached without drilling a hole in the top of the case or removing the other end from the case. That would require drilling out the pop rivets that hold it in place. To tighten the cap screws requires an Allen wrench of the right size that has an unusually-short leg, because there is little clearance above the cap screws. Fortunately, I had one. Drilling access holes in the top is probably the best thing to do, in case the screws work loose. There have been many reviews complaining that the fan was loose and made grinding noises, but JET seems uninterested in improving their quality control. I haven’t has a chance to try the machine out otherwise, because I broke my arm before mounting it. The one I bought ten years ago or so worked great, although the remote control died after a few months. It is reasonably quiet, especially on the lower settings.
While I was one that simply opened the doors and put the fans on full blast to clear a room, it never seemed to work as well looking back, there was always dust left over. Nowadays, even with the most demanding tasks going on in the shop, the Jet 1000 clears the shop in minutes. You barely hear this running, except at the top speed and then, still it’s nowhere the decibels of ANY tool you have. 3 speeds, delayed shutoff, remote control and you can buy replacement filters (12×24) at any home store to fit. It is quite shocking to see how much and how quickly the external filter cakes up. Apparently I am breathing much easier at night and not keeping someone else awake!
Purchased 1 month ago.High speed mode clears shop fast but it’s noisey, but hey, its a shop.I leave it on low and it takes longer to clear the shop but works fine.After reading some of the negative reviews I was hesitant, but it’s well worth the money
Jet…. Air Filtration System This system is without a doubt one of my best investments so far my garage/shop is about 450 square feet so this filtration system is a bit much for my garage at 550/702/1044 CFM 3 Speed remote control. This unit circulates the air in my garage several times per hour even on the lowest setting my dust control system works great I just needed something to pick up then very fine dust and this unit gets the job done no problem. I run it all the time I’m cutting wood or sanding and then for about an hour when I’m done it filters out the finest dust and is very easy to maintain it does have a timer for 2, 4 and 8 hrs I am very happy with my filtration system it is a great product and I highly recommend it.