Milwaukee 7-1/4 in. x 48 Carbide Teeth Metal Cutting Circular Saw Blade

This is a great metal-cutting blade for any circular saw. I used it to cut sheet metal for a pole barn I am building, and this blade (in combination with my Milwaukee cordless circular saw) was definitely up for the job. It cut through the sheet metal with ease, and left a nice clean edge on the sheets of steel. As with any metal-cutting job, make sure to wear gloves and eye protection, because this blade produces a lot of hot shavings (as expected). Also be careful to not throw away the arbor adapter that comes with the blade. The 20mm arbor hole was too large for my saw, so I had to dig through the trash to find the clear arbor adapter that was included.

The Milwaukee 7 1/4 inch x 48 carbide teeth metal cutting circular saw blade with 20 mm arbor appears to be a heavy duty quality saw blade. My husband could not use it because of the 20 mm arbor. It doesn’t fit any of his Ryobi circular saws. He stated that if he had a grommet, he probably would have been able to use it. My suggestion is to pay attention to the arbor sizes when purchasing saw blades.

This is an excellent Milwaukee 6-7/8 in. Carbide Teeth Metal Cutting Circular Saw Blade for cutting steel, aluminum, strut, all thread, or angle iron. This carbide blade can cut medium thick material 1/16 to ¼ inch thick. It can be used with the Milwaukee cordless handheld circular saw. It has cobalt infused tungsten carbide teeth and laser cut vibration slots.

The Milwaukee brand is absolutely wonderful. What an awesome blade! My husband wears the other brands out much more quickly than these. They seem to last so much longer and he says that they stay very sharp for a really long time.You can’t go wrong with this blade as it is exactly what is advertised. Strong, sharp and fits the saw perfectly!

This will come in handy when we start installing metal sheeting under our deck for a closed overhang. We have a Milwaukee circular saw with the 7″ blade and will use this one for our project. We like the Milwaukee brand, it has been reliable and easy to use for both myself and my husband. This should be good to use for dry metal cutting. The blades feature Carbide-Tipped Teeth with Alternate Top Bevel grind enabling users to shear through metal delivering you burr-free, cool-to-touch cuts.

This 12 inch 60 tooth blade works great in my saw for cutting aluminum extrusion. The cut is clean and straight and requires very little deburring. The carbide teeth are all attached straight and securely. The 1 inch arbor fits tight in the blade so there is no wobble. Make sure to check the speed of your saw so the blade doesn’t exceed the recommended RPMs.

It might seem crazy that you can actually cut metal by using a carbide blade and not a fiber blade. But yes, you can with these blades. The types of blades leave a cleaner cut than regular fiber blades, and tend to cut cooler. You have to allow the blade to cut as you feed and not push the blade through as you would cutting wood or plastic. the blade leaves a fine finish that needs little dressing. I prefer this type of blade over fiber.

This Milwaukee 9 in. x 48 Carbide Teeth Metal Cutting Circular Saw Blade is a longer life high-quality blade for cutting steel, aluminum, strut, all thread, or angle iron. This blade can cut medium thick material 1/16 to 3/16 inch thick. It can be used with the Milwaukee corded handheld saw. It has cobalt infused tungsten carbide teeth and laser cut vibration slots.

I discovered after I received this blade that it is rated for use with a saw having a maximum rotational speed of 2000 RPM. I had planned to mount it on my miter saw and to use it to cut 1/8” steel angle for a project I’ve started. Unfortunately, my saw has a no-load rotation speed of 3200 RPM, which exceeds the maximum recommended speed by 50%. I looked at the specs on several miter saws, both corded and battery powered, and all of them had rotational speeds in the 3000-4000 RPM range. And its diameter is too large for use on my table saw, which can be operated at speeds below 2000 RPM. I contacted Milwaukee customer support and I’m waiting to hear if they have a recommendation for a miter saw that can be used with the blade. §In the meantime, I can report that this is a beautifully crafted saw blade. The kerf is 3/32”. I appreciate that the product package can be used as protective storage for the blade when it’s not in use. §Professionally made in China.

Cuts 1/8” aluminum well, fits nicely on a Ryobi 7” brushless circular saw. My tools are Ryobi, with all my batteries, so I wanted this blade on my existing saw. The Ryobi has a smaller mounting hole than this saw blade, but luckily provides a beveled washer/arbor to accommodate different hole sizes. The blade cut both aluminum 1/8 sheet and 3/16” angle easily enough. I would recommend this for cutting at a job site or for oversized items that can’t easily fit into a bandsaw. Compared to my 10” cross-cut saw, this has a thinner kerf. My video shows how to change the blade on a Ryobi saw (many other brands operate the same way) and demonstrate an actual aluminum plate cut.

This Milwaukie carbide saw blade is really nice. It cuts clean and says it cuts cooler, although I hadn’t noticed either way on that. This blade is recommended for cutting 1/4″ – 1/8″ medium metal. It has a longer blade life compared to previous generations of Milwaukie circular saw blades. Instructions are written in English, Spanish and French. Recommended use for hand held circular saws. Made in China.

I only use MILWAUKEE 7-1/4 IN. X 48 CARBIDE TEETH METAL CUTTING CIRCULAR SAW BLADE for any medium to heavy metal cutting job I have. The cobalt infused tungsten carbide has laser cut vibration holes (see closeup photo of blade) that keeps the blade from wobbling and warping. I really like the fact that these blades don’t get as hot as others tend to do and they last much longer than any other brand I’ve tried. I highly recommend these. TIP: wear proper eye protection when cutting metal.

The Milwaukee 7-1/4 x 48 carbide teeth metal cutting circular saw blade with the 20 mm arbor required an arbor adapter to fit my Skilsaw. The saw and blade then made a very easy job of make angle cuts on the aluminum hand rail. Since the rail was to be used on steps ,I has to cut the ends to a particular angle. I had previously used a hack saw to cut the angles, but, it was difficult to securely hold the rail while cutting the aluminum. This blade amounted in a circular made the job extremely simple and more accurate, using only a simple clamp to hold the rail down.

I picked up this blade not so much for metal work because I don’t do much metal work but to try it for quality in my 10″ miter saw. I figured if it cut metal with no problem it may last longer on wood. The teeth on this blade are not ripping teeth and gave me some doubts but after trying the blade on some wood trim it performed very well. I Think I can honestly say it outperformed all other blades I have ever used. I am very happy with my decision to use it.

This is an awesome blade if you cut a lot of aluminum. I swapped it out on my table saw but don’t do a whole lot of cuts generally. It might make more sense on a shop saw in a metal shop.Blade is a steel reinforced blade and does make very nice clean cuts. If I could change anything about the product it’d be greener packaging, as it’s encased in the usual non recyclable plastic stuff that’s also hard to even cut the blade out of.

What an awesome blade! The Milwaukee brand is absolutely wonderful. My husband wears the other brands out much more quickly than these. They seem to last so much longer and he says that they stay very sharp for a really long time.You can’t go wrong with this blade as it is exactly what is advertised. Strong, sharp and fits the saw perfectly!

I ordered this blade and really don’t do much metal work but wanted to test the ability of This blade. I must say that it did not disappoint. I do some work with hardi backer and dura-rock usually cutting it with a 4.5″ grinder with a diamond blade being really messy and awkward to cut. I used this 7 14″ metal blade and it made my life a whole lot simpler. I am glad the idea to try it came to me because my job just got a whole lot easier. Thanks!

A hand-tensioned, hardened alloy steel body extends blade life and delivers the highest quality cuts available. Carbide tipped teeth with Alternate Top Bevel grind shear through metal leaving burr-free, cool-to-touch cuts. Designed for use with the M18 Cordless 5-3/8 in. Metal Saw, these blades feature a thin kerf that reduces the amount of drag and resistance while cutting, resulting in more cuts per charge.

The Milwaukee 6 1/2 inch 48 carbide teeth metal cutting circular saw blade is well made and designed to get the job done. It is rated for cutting steel and aluminum in medium 1/16 to 3/16 thickness. I found it to adequate for the job and easy to work with. I especially liked the packaging that provides easy removal from the plastic sleeve and easy storage after use.

Be Careful with this blade! Max 2000 RPM limit! Excellent blade for the correct (slower) saw.Most 12-inch wood working miter and chop saws and abrasive cut off saws run from 3500 to 4000 RPM. That is WAY too fast for this blade. If you have the correct saw for this blade (12-inch, 1-inch arbor, running below 2000 RPM), it is an awesome tool. Teeth are beautifully polished. Seems a shame to cut metal with it. ha ha.The package says it is recommended for medium (1/8 inch to 1/4 inch) and thick (1/4 inch to 1/2 inch) metal. The front of the blade says it is for Steel, Aluminum, Strut, AllThread, and Angle Iron.It IS NOT recommended for cutting Stainless Steel.It has a 1″ (25.4mm) arbor