Milwaukee Vacuum Assisted Dust Extractor

OSHA regs are here but using this is not just for the jobsite…this product is great for doing HEAVY renovations at home too. The extractor comes with 3 different sized collars with handles to adapt to pretty much any brand SDS rotary drill. I have a M18 SDS and it fits great but the best part is that it actually works. If you combine it with a y-splitter and necessary reducers, you can use a speed clean dust collection bit and be doing really good at dust collection. The adjustable depth stop and ruler are a bonus too for those holes that only need to be 4″ deep eliminating the need to wrap a round of tape to let you know you are there.

Milwaukee assisted dust extractor is extremely handy and so easy to use. I use this for jobs around my house that are big and small. I use this with my hammer drill. You have 3 options to attach the collars onto your drill. The universal hose fits on my vacuum hose. What I did is play around with the 3 collars to find out what job it suited best. When you start drilling the debris is sucked through the unit to your vacuum. Very impressed on the dust collection with barely any clean up.

I used this on a bosch hammer drill to finish a basement. I used it directly on concrete and also through foam board and wood studs for holes for attaching these materials. It peformed flawlessly in every application and i could not see any dust after drilling. The depth attachment works great too.

This is a great addition to your roto-hammer or hammer drill made by Milwaukee.There are several different adapters to fit multiple models and styles.The dust collector system works great removing debris as you drill. You will need to have the step down attachment to accept the extractor’s size.There is a debt adjustment for the extractor so you can set the drilling depth.Just plug in the vacuum hose and go.

This Milwaukee vacuum assisted dust extractor is the perfect tool for abating dust on the job site or on jobs around the home. It comes with 3 different size clamps and fits most sized drills. It attaches by removing the handle supplied with your existing drill and replacing it with this dust extractor handle.A regular vacuum hose (2-1/2″ 1-7/8″ 1-1/2″ 1-1/4″ are all supported) twist fits on to a 360 degree rotating port on the tool.Please take a look at my video for a better idea on how this works and how it attaches to your drill.It supports the following sizesDiameter / CircumferenceS = Ø 43-46 mm (1.7″-1.8″) / 135-144.5 mm (5.3″-5.7″)M = Ø 48-55 mm (1.9″-2.2″) / 151-173 mm (6″-6.9″) L = Ø 56-59 mm (2.2″-2.3″) / 176-185 mm (6.9″-7.2″)