No products in the cart.
Sale!
Jet ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10
$852.49
Offer numerous high-end features, such as an arbor lock and quick-release riving knife with Jet ProShop II table saw with 30 in. Rip and Cast Wings JPS-10.
Free U.S. Standard Shipping
90-Day Money Back
In stock
Description
The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves and the quick release riving knife reduces chance of kickback. The exclusive ProShop fence system is available in 30 or 52 rip capacity.
- Newly designed arbor lock to change blades quickly and easily
- Quick release riving knife for hassle free riving knife changes
- Improved dust shroud around blade for greater dust collection
- Convenient, magnetic paddle switch for the safest operation possible
- Innovative single belt design for easier belt tensioning and reduced vibration
- Motor reset switch conveniently relocated to the power switch, instead of the motor
- Redesigned guard for better protection and ease of use
- On board storage for all included accessories
- CSA certified
Additional information
| Weight | 301.6 lbs |
|---|---|
| Dimensions | 60 × 40 × 43 in |
| Model | 725002K |
| Tools Product Type | Power Tool |
| Table Width (in.) | 27 |
| Table Tilt Right Max (degrees) | 0 |
| Table Tilt Left Max (degrees) | 45 |
| Table Length (in.) | 20 |
| Rip Capacity - Right | 30 |
| Rip Capacity - Left | 13-1/2 |
| Power Tool Features | Blade Guard System, Stand Included |
| Portability | Stationary |
| PT Horsepower (Hp) | 1-3/4 |
| Maximum Speed (rpm) | 4000 |
| Maximum Cut Depth @ 90 Deg. | 2.125 |
| Maximum Cut Depth @ 45 Deg. | 2-1/8 |
| Horsepower (hp) | 1.75 |
| Included Accessories | Stand |
| Dust Collection Method | 4 in. Dust Port |
| Depth Control | Yes |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Cord Length (ft.) | 6 |
| Construction Material | Cast Iron |
| Condition | New |
| Color Family | White |
| Blade Speed | 4000 |
| Blade Location | Centered |
| Blade Diameter (in.) | 5/8 |
| Bench & Stationary Tool Type | Table Saw |
| Amperage (amps) | 20 |
| Work Table Surface | 20 in. x 27 in. |
Reviews (1)
1 review for Jet ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10
Only logged in customers who have purchased this product may leave a review.
Related products
Sale!
Saws
Model# D28715(76)
$171.75
Sale!
Saws
Model# DW317K(66)
$65.40
Sale!
Saws
Milwaukee 13 Amp 1-1/4 in. Stroke Orbital Super Sawzall Reciprocating Saw with Hard Case
Model# 6536-21(23)
$85.05
Sale!
Saws
Model# 5377MG(84)
$149.25
Sale!
Saws
Model# DW304PK(86)
$40.50
Sale!
(55)
$107.98
Sale!
(33)
$99.50
Sale!
Saws
Model# 6955-20(94)
$411.95
Helen Kunde
Verified Purchase
I’ve had this saw for three years now and know a bit about it. Having said that, I wish I’d bought at least a 3HP saw and Jet has some good looking ones. That is not the saw’s fault but mine. For a contractor saw in this class, I think this is a great little saw. If you take your time on set up, which I’ve done more than once, it will cut accurately. Its not a cabinet saw, but is probably in the running for best in class. Set up properly it will cut well. If you take the advise of many reviews that I have read, they always say the blade is not good and should be replaced. I took that advise and bought several expensive blades, none of which cut as well on this saw as the supplied blade. Its not a full kerf blade, but its not as narrow as the thin kerf blades on the market. Maybe its metric. But the saw will bog down cutting with a full kerf in maple and wanders with a thin kerf in the same. The supplied blade is a goldilocks compromise and its actual produces good results. Also, thin kerf blades are below the minimum width to allow use of the riving knife so you can’t use the blade guard feature. The blade guard is excellent by the way and I use it whenever I can.If this is the market you’re in due to price I don’t think you can go wrong. The dust collection does not work well — nothing in this range does. But it will spin a small dado sets with extrodinary results. I put Incra rails and fence on mine and it works very well (don’t think this is necessary), but I fear that most of what I was trying to correct was due to not using the suppplied blade. Use that blade and this thing will do the job for you. Great little saw and at a fair price.