Milwaukee Hole Dozer with Carbide Teeth hole saws provide 50X Life in Extreme Multi-Material cutting applications when compared to bi-metal hole saws. Built utilizing a tough carbide grade combined with a durable 4TPI design, yielding the best tooth durability and longest life in Stainless Steel, Abrasive Materials and Fastener Embedded Wood. Cutting depth is 1.62 in., allowing clearance to handle cuts in all materials. With a Thermoset Coating to reduce friction and drag during cutting, users benefit from faster cutting and increased cordless efficiency. Slug removal is made easy with the Plug Jack T-Slot’s. Plug Jack enhanced user productivity by providing best access and leverage to remove material slugs. Hole dozer with carbide teeth.
- Milwaukee carbide teeth technology
- 4-TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-jack T-slots enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: 4-hole saws: 7/8 in., 1-1/2 in., 2 in., 2-1/2 in., 2 arbors: 49-56-7010, 49-56-9100, 2 pilot bits, 1 hex key
I already had some of the larger size hole dozer saws so the quality of these is no surprise to me. I knew they are top quality saws built heavy to hold up to the job. This is a nice selection of sizes with the sizes of mandrels as well as extra bits for each. I needed some to cut some holes in cement board and these are just the ticket for that job. The case is well made and built with padding positioned in a way to help keep things in place when the closes case is being moved about. That is a nice touch. What good is a case when you open it and everything is all over the place. Not happening here. You can’t go wrong with these Milwaukee saws if you need something that will stand up to the job. I’ve had good luck with these over time. It worked out great for me that the sizes on this meshed perfectly with the ones I already had. I know that is luck that I already had just the bigger ones but I’ll take it. But you don’t need luck to for these to last.
Have had several of these kits in the years as a DIYer, but this seems to be the best so far.Plastic box contains the saws in an orderly fashion, has space for additional smaller than 7/8th saws, and the locking mechanism is sturdy as this bounces around the back of my truck.Past sets were not painted, and as these are white painted, there is a residue buildup the first few times the drills are used.Saws are easy to attach / remove with the supplied tool. May be difficult if the same saw is used for a long time and gets jammed in the locking mechanism.The only negative I saw was that for 6 of the 8 saws there were bulging teeth at the weld site. I used a plier to set them back and there was no discernable issue with the hole cutting.
I really like this set. I wanted to install wiring for security system and this set did great easily cut through a variety of wood depths but I have not had the opportunity to use it on metal yet. It is a great set for my home projects. the Teeth are large and sharp and make clean holes with attached to my Milwaukee drill. The variety of hole sizes and their quality construction should make this a well used set for my home projects.
Being a do it yourself’er you just never know when your going to need to cut a hole in wood, wallboard or some other material. So go these to while doing a project. As you can see my the picture plenty of sizes. The largest bit fit on my small hand held drill with no problem. Each hole saw comes with a drill bit and set into your drill head. Learned through a couple of practice holes the best way is slow and easy. Great set for the DIY’er.
Great product, thought the kit came with all the sizes opened it and half the dozers are missing.
This is a great set of hole saws. What I use them for is a little different than what most people use them for, but I do a lot of wooden toy building with wooden wheels of different sizes. It was always a hassle to use my adjustable cutter to make different size wheels for a toy. These hole saw makes it super easy and accurate every time. Just a matter of exchanging blades to make different sizes. The wheels are easy to remove from the blades just by unscrewing the blade from the center drill and slide out. Gives me a nice clean cut with the axle hole dead center, only thing left to do is sand them a little and stain and ready to go on the toy.
Milwaukee Dozer 8 Piece Carbide Teeth Hole Saw KitGotta Love Milwaukee! This kit is basic with only 4 Carbide teeth hole saw blades, (7/8”, 1-1/2”, 2” and 2-1/2”) two arbors and 4 drill bits but the included cool looking case has room to expand the kit. The included blades will get you a good start at a reasonable price. You can then purchase additional hole saw blades as needed, with room in the case for storage of those new blades. The case is a well made durable molded plastic case with a quality hinge, nice handle and smooth working sliding latch that keeps the case closed and prevents the blades from getting damaged. The carbide teeth on these hole saw blades are very sharp and they cut through the plywood I was using with ease. The sides of the round blades have openings that make removing the waste material easier. I used a flat blade screwdriver. Quick Change Arbors makes changing the blade on the arbor quick and easy. I really like this set and the bright red Milwaukee case makes it easy to find my hole saws when I need them. I would highly recommend this hole saw starter set to anyone who is looking to drill large holes.
This 8 pc. Milwaukee hole dozer set is perfect for the DIY or Professional. It’s an extremely durable tool and well designed. Basic hole saws cut soft materials and this hole dozer cuts hard materials such as stainless steel, cement board, fiberglass and more. It has 50x life in extreme multi cutting applications, the best tooth durability with carbide teeth, and longest life in stainless steel. The Thermoset coating reduces friction and drag, and the Plug Jack T-slots provide access to remove slugs. It arrived in a great storage case to keep saws and mandrels together. My first practice hole went well and I highly recommend this set.
So far so good, I only made a few 2½” holes for pipe through 2×6’s. I hope they last because they’re fairly expensive
This is the first set of high-quality holesaw‘s that I’ve ever owned, my previous versions were cheap knock offs that came from the freight store.The plastic box is super well-made with a great handle and case for easy storage. I like that it comes with two different size of pilot bit housings to accommodate the smaller and larger hole saws and especially the larger one for fitting into my larger electric drill.I mainly use these four finished holes into countertops for cabling grommets and finished wood for the same. The saws don’t tear up the word too terribly bad (if taped) and make for a nice clean hole into finished woodwork. They seem to cut through harder woods like Maple and Oak fairly easily. Very happy with the overall quality and the quality of cuts that I’m getting from the saws.
This is a real nice set of hole saws that will come in handy for your handyman projects. The cutter sizes are good for most any job. There are two drill shafts of different size and the large one will be too big for some small light drills. I like that the cutters are made for deep cuts in thick materials. The carbide tips should last a long time. This is a better quality set of cutters than you will find at the discount tool stores.
This is a very complete, very high quality hole saw set. It comes with 2 arbors, one each for large and small hole saws. The saws are easy to install on the arbors and feel very secure. With the small saws, I found that I needed to use a wrench to remove the saw after making several cuts. I used these with an older (non-brushless) 18V makita compact drill and it had no problem spinning the largest (2 1/2″) saw through 2x material at high speed. The coating seems very durable, showing only minor wear after making 6 cuts in 2x material and 2 through a steel-clad exterior door. The blade stayed as sharp as new through this and cutting didn’t slow at all. The set comes with 2 replacement pilot bits, which will probably come in handy if you use in material other than wood. As a homeowner, I will probably never need another hole saw set. I have previously gone through a few 2 1/8″ saws drilling door knobs, and their quality didn’t even approach this.
I’ve generally considered hole saws to be a somewhat disposable tool, having experienced so many in the past that became uselessly dull after only a few cuts. Especially when working with hardwoods or metals. These hole saws from Milwaukee may change my attitude. They’re carbide tipped, giving them a durability that the standard steel saws don’t have. Just to test them, I made multiple cuts in some scrap hard maple flooring I had lying around with no signs of dulling. The cuts were quick, clean, and generated minimal heat. The included guide drills and hardware are well designed and allow for easy changing to a different size hole saw. Overall, another fine product from Milwaukee – highly recommended!
The Milwaukee Hole Dozer Carbide Hole Saw Set (13-Piece) Model # 49-22-3090 incorporates 4 TPI carbide teeth design for durability and long life. These saws are capable of Multi-Material cutting of stainless steel, wood, cement board, fiberglass, plaster, asphalt shingles and more. This set includes 8 hole saws: 7/8 in., 1 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in., 2-1/4 in., 2-1/2 in., 2 arbors: 49-56-7010, 49-56-9100, 2 pilot bits, 1 hex key. Made in USA, Milwaukee supports their product with a Limited Lifetime Warranty.
A very high quality hole saw set when compared to previous options in my shop. Everything about this set is much better than economy sets. The drill bits are very good quality and the hole cutters are heavy duty and lock in place for use. Sizes in my 13-piece set vary from 7/8″ to 2 1/2″. My only use so far has been in wood and this set quickly cuts a smooth hole/plug. Even the plug might be useful in some craft projects. The plug was easily removed especially after the drill bit is removed. I was initially concerned about a couple of the sizes since it appeared that the teeth did not line up where the metal was joined. But in use I had no problem and it did not appear to affect the quality of the cut. The fact that these can handle many different materials adds to their versatility. Overall a nice addition to my tool collection.
These carbide tipped hole saws work well on wood AND metal which is a plus compared to standard hole saws that are designed to cut softer materials like wood, drywall and plastic. I was drilling a hole for a surveillance camera mount with a flat blade spade drill when I hit a nail. I switched to this Milwaukee hole saw and completed the cut with little effort. Because of the nail, I destroyed the cutting edge on the spade drill but did no damage to the hole saw blade. I’m glad I got this set and will be adding additional saw sizes. The case makes it easy and convenient to keep all saws and mandrels in one location.
The Milwaukee Dozer Carbide 13-Piece Hole Saw Set is a nice kit. I could have really used it about 2 days before it arrived. That only proves that Murphy is alive and well. The case is nice. Two different arbors were included, one for smaller hole saws and one for the larger sizes where they are held by pins. There were spare drills included for the arbors. The sizes on the sides of the individual hole saws were hard to read so I took an ultra fine permanent marker and went over the indented size numbers and that helped. I only did the inch sizes and may do the millimeter sizes if needed. The following sizes were included, inches – (mm): 7/8 – (22), 1 – (25), 1-1/8 – (29), 1-3/8 – (35), 1-3/4 – (44), 2 – (51), 2-1/4 – (57), and 2-1/2 – (64). All in all, a very nice hole saw kit.
MANY FEATURES; OFFSET TEETH — The Milwaukee Hole Dozer Carbide Hole Saw Set (13-Piece) is in many ways superior to my previous hole saws: 50X life vs. 2X; well-designed case vs. saws jumbled in my tool box. The quick change arbors are easy to use. The compact case is exceptionally well-designed to store the eight hole saws, two arbors, two spare drill bits and the hex wrench to adjust or change the drill bits. The inside top of the case is padded so that the teeth on the hole saws are not damaged. Having eight hole saws in one place makes it likely that you will have the size that you need. The four smaller hole saws have their sizes marked on the side and the bottom; the four larger ones have their sizes marked on the side. Six of the eight hole saws have offset (misaligned) teeth. Milwaukee says this was done intentionally to grip the surface and cut into it better. To me, this seems to impede rather than enhance the cut. All of my previous hole saws have their teeth aligned in a perfect circle. After several cuts, the teeth were still as sharp as when new. The plug is easily removed on material less than 1″. For material greater than 1″, it is better to use the two-sided method or stop half way through and remove the plug before continuing. It is made in the USA of global products. The teeth have a limited lifetime warranty against breaking. RPM instructions are included for drilling in metal.
The Milwaukee Hole Dozer Carbide Tooth Hole Saw Set (8-Piece) is an impressive tool set. It features hole saw bits with carbide teeth that can handle materials that will quickly destroy normal hole saws. You can safely cut all woods, plastics, most metals (including stainless steel), roofing shingles, and even fiber-cement board. This kit includes an easy to use quick-release bayonet-stud style of arbor for the larger hole saws and a quick screw-on one for smaller size hole saw bits. It comes in a heavy duty blow-molded carry case that is well organized and has room for quite a few more hole saw bits. This kit only has four sizes of hole saw bits but you can get additional saw bits or even more complete sets from Milwaukee and the Home Depot. I’ll be getting more bits as I need them.